Samsung SM-G531H mic ways

It's about samsung g531 h mic solution. Please follow the below picture diagram to get repair mic problem of samsung g531h.

Touch way of Asus Zenfone 2

If facing the problem of asus zenfone 2 touch is ok but not working at all. You may follow the picture diagram ways

 Asus Zenfone 2 touch ways

Nokia 105 LCD ways

Nokia LCD ways for how to jumper wire from board to LCD connector

Nokia 105 LCD ways

BlackBerry Q10 LCD ways

Assess carefully on connector pin perhaps not on associated components in this sequence.
1. 2_2OLED_F to pin 28,30 2.2v.
2. 3_1OLED_F to pin 22,24 3.10v.
3. SYS_F to pin 3,5.(this is 3.6v battery volt.)
4. Datelines to pin 13,15,19,21,25,27.
5. LCD remainder to trap 31 via R2800 their should be 1.8v.

Just above pin employed by liquid crystal display.

Ensure your handset is fully in working in fully link adjust and pc. Its revealing red light simply.
you mentioned "after I eliminate the diode is heading to black display " before that you observed in in liquid crystal display in working fine?

BlackBerry Q10 LCD WAYS

HTC HD mini power button ways

HTC HD mini T5555 power button/switch line broken or line Vbat line missing? follow this below diagram are marked.

HTC T5555 power ways

HTC Desire A8181 Power key solution

HTC Desire and Nexus Power button line broken or missing just follow HTC desire power key ways solution.

HTC desire power key ways

Symphony W16 auto recovery / boot mode repair

Symphony W16 Auto recovery or boot mode showing when try to power on.
First: Clean as well volume +, -, power button.
Second: Remove corrupted capacitors marked below.

W16 auto_factory_mode

Blackberry 9000 No power / Dead repair

Blackberry Bold 9000 dead no power or bricked repair

First: If no power, no response via USB cable on pc re-hot rebal power ic,

Second: If steel no change? change power ic from another blackberry board.

iPad 2 3G free iCloud unlock procedure

Hot! hot! iPad 2 3G iCloud remove solution is absolutely free. Actually it's a hardware operation to make unlock.
Note:This procedure only works with iPad 2 3G/cellular version. Make sure is it iPad 2 3G or WiFi? cellular version iPad 2 3G has imei in back side.
Also be careful, If you are unsure of your skills. Entrust this works to professionals.

Procedure:

• Disassemble the iPad, Take out the motherboard.
• Now Have to find resistors responsible for border_id remove them, you will turn off the modem and change identity of your iPad.

• On the model A1396 (GSM) remove the resistor r1205. On the model A1397 (CDMA) remove the resistor r1205.
• iPad will enter DFU mode.
• Connect the iPad on PC or Mac.
• After that you need to restore thought iTunes, with fair of the.

Samsung GT-P1000 Power and Volume- key ways

Samsung GT-P1000 volume mines and power key Problems solution.
P1000 power key and volume- key  repair guide diagram.

GT-P1000 volume mines and power key ways

iPhone 5S BlueScreen and error 14 solution

iPhone 5s bluescreen problem repair ways it's also works with itune restore error code: 14.
infamous blue screen/error 14 problem that usually appears after LCD changing or just disassembling the iPhone 5S.

So follow the below image to resolve it.